4” HELICAL SOLAR PUMP COMPLETE SOLUTION KIT
The 4” Helical Rotor iSOLAR PDP4 increases the scope and flexibility of the iSOLAR product suite. The highly efficient and innovative iSOLAR M220HR motor, and the positive displacement wet end exploits the versatility of the motor’s operating range to deliver water even when solar conditions are less than optimum.
The iSOLAR 4” PDP can be installed down a bore, in a tank or fitted to a pontoon to supply from an open body of water.
| BIA-PDP4 SOLAR900 |
| Motor |
2.2 kW |
| Rated Motor Speed |
3600rpm |
| Degree of Protection |
IP68 |
| Max Head |
300m |
| Max Flow |
11.5 L/min |
| Min Fluid Temp |
10°C |
| Min Fluid Temp |
40°C |
| DC Voltage and Current |
| Vmpp |
60-380V |
| Voc |
60-440V |
| Amps |
12A |
| AC Voltage and Current |
| Volts |
90-280V |
| Amps |
10A |
Solar array recommendation indicative only Solar inputs must respect the VOC and Max Current (Amperage) values
Renewable Solar Energy
A typical solar pumping system consists of the following: A solar array to convert sunlight to electricity, a controller to manage the power from the array to the motor which rotates the pump to move the water to where you need it most.
