RAINSAVER MK6
The RAINSAVERMK6 is an Automatic Rainwater / Mains Water Changeover Device designed to provide automatic mains back up for Pressure Pump supply systems.
The RAINSAVERMK6 is designed to be installed in conjunction with a Pressure Pump supply system that is fitted with an independent pressure and flow controller with loss of prime protection and 24 hour auto restart.
Features & Benefits
- Requires no power supply and consumes no electrical energy
- Suitable for a wide range of rain harvesting set-ups
- Designed to operate with pumps and mains up to 1000 kPa (145 psi)
- Pump flows to 95 l/m, mains flow to 40 l/m (at 500kPa mains)
- Designed to further save water resources by reducing incoming mains to 200 kPa
- Requires no weather proofing
- Can be mounted any distance from the pump underground or inside a tank
- Completely waterproof - Can be hosed down without the fear of electrocution
- UV stabilised technopolymer for long life and good looks
- All Rainsaver MK6 pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24 hour automatic pump restart
- WaterMark approved components for connection to all town water supplies
- Safe against water borne bacteria, dezincification and lead poisoning
- No unsightly controller power, water level float cables or the need for a dedicated controller power point
- Australian owned and designed
| Product Specifications |
| Maximum Water Temperature (mains & pump) |
40ºC |
| Maximum Recommended Continuous Pump Flow |
120 L/min |
| Maximum Recommended Pump Pressure |
200 kPa |
| Maximum Recommended Mains Inlet Pressure |
200 kPa |